How to use Flakka Test?

1. Remove the Flakka test from its sealed pouch and use it as soon as possible. For best results, perform the assay within an hour.
2. After that, hold the test by the end, where you can see the product name. So, to avoid contamination, do not touch the test membrane.
3. Then, holding the dip test vertically, dip the test in the urine specimen for at least 10-15 seconds. Do not immerse above the maximum line (MAX) on the test. That’s about 1/5th of the way up the dip test.
4. After the Flakka test has finished, then remove the test from the specimen and place it on a non-absorbent flat surface. Start the timer and wait for the colored band(s) to appear. Finally, read the result at 5 minutes. Do not interpret it after 10 minutes.

Drug Test Results:

Positive

Only one colored band appears, in the control region ©. No apparent colored band appears in the test region (T)

Invalid

Control band fails to appear. Results from any test which has not produced a control band at the specified read time must be discarded. Please review the procedure and repeat with a new test. If the problems persist, discontinue using the kit immediately and contact your local distributor.

Negative

Two colored bands appear on the membrane. One brand appears in the control regions © and another band appears in the test region (T).